QAHV-N560YA-HPB

PDF Publication Title:

QAHV-N560YA-HPB ( qahv-n560ya-hpb )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 025

[3] Configuring the Settings The settings must be set only by a qualified personnel. <1> Making the settings Use the LED display and the three push switches (SWP1 (↑), SWP2 (↓), and SWP3 (Enter)) to change the current settings on the circuit board and to monitor various monitored values. (1) Setting procedures Take the following steps to set the push switches SWP1 through SWP3. These switches must be set after the dip switches SW2 and SW3 have been set. 1 Normally an item code appears on the display. (The figure at left shows the case where item code 1 is displayed.) Press SWP3 (Enter) to advance the item code. ↓ Press SWP3 (Enter) until the item code appears that corresponds to the item to change or monitor its value. 2 The left figure shows a display example (Code 9 Outlet hot water temperature setting). ↓ Press either SWP1 (↑) or SWP2 (↓) to display the value that corresponds to the selected item. 3 The current setting value will blink. ↓ The left figure shows that the current setting value is "60.0." To decrease this value to 58.0, for example, press SWP2 (↓). Press SWP1 (↑) to increase the value. 4 When the desired value is displayed (58.0 in the example at left), press SWP3 (Enter). ↓ The displayed value will stop blinking and stay lit. A lit LED indicates that the new setting has been saved. * Pressing SWP1 (↑) or SWP2 (↓) will change the blinking setting value, but the change will not be saved until SWP3 (Enter) is pressed. If SWP3 is not pressed within one minute, the change will not be saved and the display will return to the item code display mode. Press and hold SWP1 (↑) or SWP2 (↓) for one second or longer to fast forward through the numbers. Press SWP3 (Enter) while the LED display is blinking (see step 3 above) to stop the blinking. * The values of the items that can only be monitored will not change when SWP1 (↑) or SWP2 (↓) is pressed. The display will stop blinking and stay lit after a minute, and the display will automatically return to the item code display regardless of the type of values displayed. To change the values of other items, repeat the steps from step 2 above. 25 SWP1 SWP2 SWP3 Enter SWP1 SWP2 SWP3 Enter SWP1 SWP2 SWP3 Enter SWP1 SWP2 SWP3 Enter

PDF Image | QAHV-N560YA-HPB

PDF Search Title:

QAHV-N560YA-HPB

Original File Name Searched:

IBIM_WT08219X05_QAHV_N560YA_HPB_ML.pdf

DIY PDF Search: Google It | Yahoo | Bing

CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info

Heat Pumps CO2 ORC Heat Pump System Platform More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)