PDF Publication Title:
Text from PDF Page: 014
Installation details This Sanden Eco Hot water Heat Pump System must be installed by licensed personnel in accordance with local building codes: Figure 8:Connecting Heat Pump unit thermistor cable Installing contractor should be licensed by applicable state/province and municipal authorities to install an Electrical & Plumbing product. Please note: The unit has been designed for heating potable domestic hot water and any other usage, such as space heating requires a heat exchanger suitable for local codes to All Electrical Wiring should be done in accordance with the latest be installed on the system to separate potable and non-potable water. edition of the National Electrical Code (NEC) and all local State/ Province and Municipality codes. The unit is designed to operate when connected to the water supply with a maximum operating pressure of 95PSI (655 kPa). To ensure the mains pressure does not exceed this, first check incoming cold water mains pressure, and then a pressure regulating device must be connected to the water supply line. Electrical Installation DANGER Installation of a temperature tempering device is MANDATORY to avoid potential This system delivers hot water exceeding 120 oF (50 oC). Installation of this system must be carried out only by a qualified installation scalds and burns. technican (electrical, HVAC or plumbing). The unit must be stored and transported in an upright position. Failure to do so may Remove the piping cover. render the unit faulty. Such failure is not covered under any warranty agreements. Connect the thermistor cable line to the terminal block. Failure to comply with the above conditions will void the warranty. Fix the thermistor cable with the code clip and conduit clip. Attach the piping cover back on the heat pump unit. Blue Black 25mm or less Green Green Wihte Code clip Thermistor cable Conduit clip Sanden Heat Pump – Owner’s Manual Page 7 of 24 SANCO2 Heat Pump – Installation Manual Page 14 of 44PDF Image | SANCO2 Heat Pump Water Heater R744
PDF Search Title:
SANCO2 Heat Pump Water Heater R744Original File Name Searched:
Installation_Manual_SANCO2.pdfDIY PDF Search: Google It | Yahoo | Bing
CO2 Organic Rankine Cycle Experimenter Platform The supercritical CO2 phase change system is both a heat pump and organic rankine cycle which can be used for those purposes and as a supercritical extractor for advanced subcritical and supercritical extraction technology. Uses include producing nanoparticles, precious metal CO2 extraction, lithium battery recycling, and other applications... More Info
Heat Pumps CO2 ORC Heat Pump System Platform More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |