PDF Publication Title:
Text from PDF Page: 208
Chapter 6. Molybdate Based Ceramic Electrode Materials 187 This could be the results of either some long-range ordering on the B-site, e.g. a pseudo-double perovskite with a new type of Ni2+/Ti4+/Mo6+ ordering, or the material might just be a composite of the two phases. Further crystallographic and microstructural studies are needed to determine if it is single-phase or a composite. Finally, the XRD data showing the reduction of La2Mo2O9 to amorphous LaMoO is presented in Figure 6-5c and compares well with that presented in the prior work [24]. Figure 6-5. X-ray diffractograms of some of the synthesized materials. 6.3.2. Electrical Conductivity The electrical conductivity was measured versus temperature and pO2. The measurements for the 100% B-site Mo (SM and LM) and solid solutions (STM and SVM) are shown in Figure 6-6. SM clearly has extremely high conductivity (Figure 6-6a), near 104 S/cm at room temperature, which is consistent with literature [31, 32, 64, 79-81]. Its conductivity had not previously been reported for this high temperature range and pO2. At 800 °C the conductivity was just under 2000 S/cm and the pO2 was 10-22 atm. However, when increasing the pO2 only slightly, to 10-20 atm, the conductivity decreased to <0.01 S/cm. The material oxidized and became the insulating SrMoO4 phase, at least on the surface where the voltage probes made contact. This is roughly consistent with the reported narrow pO2 window for stability of SM at the higher temperature of 1200 °C [63]. SVM (Figure 6-6b) and STM (Figure 6-6e) also exhibited very high conductivity, around 400 S/cm at 800 °C in 10-20 atm O2. Similar values have been reported in literature forPDF Image | Electrolysis of CO2 and H2O
PDF Search Title:
Electrolysis of CO2 and H2OOriginal File Name Searched:
co2-hso-fuels.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP |