PDF Publication Title:
Text from PDF Page: 084
72 IPCC Special Report on Carbon dioxide Capture and Storage from industry, government or supra-national bodies. At present, it is too early in the exploitation of this technology to make confident predictions about these matters. Three annexes provide information about the properties of CO2 and carbon- based fuels, a glossary of terms and the units used in this report. Gaps and areas for further work are discussed in the chapters and in the Technical Summary to this report. References Aresta, M. (ed.), 1987: Carbon dioxide as a source of carbon; biochemical and chemical use. Kluwer, the Hague. Audus, H. and H. Oonk, 1997: An assessment procedure for chemical utilisation schemes intended to reduce CO2 emission to atmosphere. Energy Conversion and Management, 38(suppl. Proceedings of the Third International Conference on Carbon Dioxide Removal, 1996), pp S409–414. Audus, H. and P. Freund, 1997: The costs and benefits of mitigation: a full fuel cycle examination of technologies for reducing greenhouse gas emissions. Energy Conversion and Management, 38, Suppl., pp S595–600. Audus, H., O. Kaarstad, and M. Kowal, 1996: Decarbonisation of fossil fuels: Hydrogen as an energy carrier. Proceedings of the 11th World Hydrogen Energy Conference, International Association of Hydrogen Energy, published by Schon and Wetzel, Frankfurt, Germany. Azar, C., K. Lindgren, and B.A. Andersson, 2003: Global energy scenarios meeting stringent CO2 constraints - cost-effective fuel choices in the transportation sector. Energy Policy, 31, pp. 961–976. Baer, P., 2003: An issue of scenarios: carbon sequestration as an investment and the distribution of risk. An editorial comment. Climate Change, 59, 283–291. Baklid, A., R. Korbøl, and G. Owren, 1996: Sleipner Vest CO2 disposal: CO2 injection into a shallow underground aquifer. Paper presented at the 1996 SPE Annual Technical Conference, Denver, Colorado, USA. SPE paper 36600, 1–9. Benemann, J.R., 1993: Utilization of carbon dioxide from fossil fuel burning power plant with biological systems. Energy Conversion and Management, 34(9–11) pp. 999–1004. Berk, M.M., J.G. van Minnen, B. Metz, and W. Moomaw, 2001: Keeping Our Options Open, Climate Options for the Long Term (COOL) – Global Dialogue synthesis report, RIVM, NOP rapport nr. 410 200 118. Blunt, M., F.J. Fayers, and F.M. Orr Jr. 1993: Carbon Dioxide in Enhanced Oil Recovery. Energy Conversion and Management, 34(9–11) pp. 1197–1204. BP, 2003: BP Statistical Review of World Energy. London. Bulter, F.A.G den and M.W. Hofkes, 2004: Technological Transition: a neo-classical economics viewpoint. In Sciences for Industrial Transformation: views from different disciplines. X. Olsthoorn and A.Wieczoreck (eds.). Kluwer Academic Publishers, Dordrecht. Cole, K.H., G.R. Stegen, D. Spencer, 1993: Energy Conversion and Management, 34 (9–11), pp, 991–998. Deshun, L., Y.G. Chen, O. Lihui, 1998: Waste CO2 capture and utilization for enhanced oil recovery (EOR) and underground storage - a case study in Jilin Oil field, China. In Greenhouse Gas Mitigation - Technologies for Activities Implemented Jointly, Riemer P.W.F., A.Y. Smith, K.V. Thambimuthu, (eds). Pergamon, Oxford. Dooley, J.J. and M.A. Wise, 2003: Retention of CO2 in Geologic Sequestration Formations: Desirable Levels, Economic Considerations, and the Implications for Sequestration R&D. Proceedings of the 6th International Conference on Greenhouse Gas Control Technologies. J. Gale and Y. Kaya (eds). Elsevier Science, Amsterdam pp. 273–278. Dunsmore, H.E., 1992: A geological perspective on global warming and the possibility of carbon dioxide removal as calcium carbonate mineral. Energy Conversion and Management, 33(5– 8), pp. 565–572. Edmonds, J.A., P. Freund, J.J. Dooley, 2001: The role of carbon management technologies in addressing atmospheric stabilization of greenhouse gases. Proceedings of the 5th International Conference on Greenhouse Gas Control Technologies, D. Williams, B. Durie, P. McMullan, C. Paulson, A. Smith (eds). CSIRO, Australia, pp. 46–51. Fletcher multilaterals, The texts of UNCLOS, the London Convention, OSPAR convention and other treaties can be seen at http://fletcher.tufts.edu/multilaterals.html. Freund, P. and J.E. Davison, 2002: General overview of costs, IPCC Workshop, Regina. Freund, P., 2001: Progress in understanding the potential role of CO2 storage. Proceedings of the 5th International Conference on Greenhouse Gas Control Technologies (GHGT-5), D.J. Williams, R.A. Durie, P. McMullan, C.A.J. Paulson, and A.Y. Smith (eds). CSIRO, 13–16 August 2000, Cairns, Australia, pp. 272–278. Gale, J., N.P. Christensen, A. Cutler, and T.A. Torp, 2001: Demonstrating the Potential for Geological Storage of CO2: The Sleipner and GESTCO Projects, Environmental Geosciences, 8(3), pp.160–165. Gipe, P., 2004: Wind Power: Renewable Energy for Home, Farm, & Business. Chelsea Green Publishing Co., USA ISBN 1-931498-14-8. Gunter, W.D., T. Gentzis, B.A. Rottengusser, R.J.H. Richardson, 1997: Deep coalbed methane in Alberta, Canada: a fuel resource with the potential of zero greenhouse gas emissions. Energy Conversion and Management, 38, Suppl., pp. S217–222. Ha-Duong, M. and D.W. Keith, 2003: Carbon storage: the economic efficiency of storing CO2 in leaky reservoirs. Clean Technologies and Environmental Policy, 5, pp.181–189. Haugan, P.M. and F. Joos, 2004: Metrics to assess the mitigation of global warming by carbon capture and storage in the ocean and in geological reservoirs. Geophysical Research Letters, 31, L18202. Hawkins, D.G., 2003: Passing gas: policy implications for geologic carbon storage sites. Proceedings of the 6th International Conference on Greenhouse Gas Control Technologies, J. Gale and Y Kaya (eds), Elsevier Science, Amsterdam pp. 249–254.PDF Image | CARBON DIOXIDE CAPTURE AND STORAGE
PDF Search Title:
CARBON DIOXIDE CAPTURE AND STORAGEOriginal File Name Searched:
srccs_wholereport.pdfDIY PDF Search: Google It | Yahoo | Bing
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info
Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info
Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info
NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info
Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)