GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONS

PDF Publication Title:

GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONS ( gas-turbines-in-simple-cycle-combined-cycle-applications )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 029

Fig. 39. Air system flow in the turbine. Source: Courtesy of Butterworth Heinemann, from “Process Plant Machinery” 2nd edition, Bloch, H. and Soares, C., 1998, original source Rolls Royce Bearing and lubrication system Basically, sleeve bearings locate the turbine modules concentrically around the shaft(s) during operation and when the turbine is not running. They provide the rotor with support. The thrust developed by the overall rotor is absorbed by thrust bearings at the end of the rotor. One arrangement of key bearing positions is shown in figure 40. Fig. 40. Main internal air system flows. Source: Courtesy of Butterworth Heinemann, from “Process Plant Machinery” 2nd edition, Bloch, H. and Soares, C., 1998, original source Rolls Royce Oil flow to the bearings is regulated. The bearings in the hot section require far more oil flow than those in the cooler compressor section. Thermocouples or RTDs measure oil flow temperature. Sudden temperature rises in the oil trigger an alarm or shutdown. The section on design development refers to varying design philosophies between OEMs. The lubrication system is one area where it shows as much as anywhere else. Certain OEMs have a preference for greater lubrication flows than others, at a given temperature range. 29

PDF Image | GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONS

PDF Search Title:

GAS TURBINES IN SIMPLE CYCLE COMBINED CYCLE APPLICATIONS

Original File Name Searched:

gas-turbine-combined-cycle.pdf

DIY PDF Search: Google It | Yahoo | Bing

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

IT XR Project Redstone NFT Available for Sale: NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Be part of the future with this NFT. Can be bought and sold but only one design NFT exists. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Turbine IT XR Project Redstone Design: NFT for sale... NFT for high tech turbine design with one part 3D printed counter-rotating energy turbine. Includes all rights to this turbine design, including license for Fluid Handling Block I and II for the turbine assembly and housing. The NFT includes the blueprints (cad/cam), revenue streams, and all future development of the IT XR Project Redstone... More Info

Infinity Turbine ROT Radial Outflow Turbine 24 Design and Worldwide Rights: NFT for sale... NFT for the ROT 24 energy turbine. Be part of the future with this NFT. This design can be bought and sold but only one design NFT exists. You may manufacture the unit, or get the revenues from its sale from Infinity Turbine. Royalties go to the developer (Infinity) to keep enhancing design and applications... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: The Infinity Supercritical 10L CO2 extractor is for botanical oil extraction, which is rich in terpenes and can produce shelf ready full spectrum oil. With over 5 years of development, this industry leader mature extractor machine has been sold since 2015 and is part of many profitable businesses. The process can also be used for electrowinning, e-waste recycling, and lithium battery recycling, gold mining electronic wastes, precious metals. CO2 can also be used in a reverse fuel cell with nafion to make a gas-to-liquids fuel, such as methanol, ethanol and butanol or ethylene. Supercritical CO2 has also been used for treating nafion to make it more effective catalyst. This NFT is for the purchase of worldwide rights which includes the design. More Info

NFT (Non Fungible Token): Buy our tech, design, development or system NFT and become part of our tech NFT network... More Info

Infinity Turbine Products: Special for this month, any plans are $10,000 for complete Cad/Cam blueprints. License is for one build. Try before you buy a production license. May pay by Bitcoin or other Crypto. Products Page... More Info

CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com (Standard Web Page)