IT50 Waste Heat to Power System ORC

All Products IT10 IT10 System IT50 IT50 System IT250 IT250 System CO2 Turbine Generator ROT ROT 06 ROT 15 ROT 24 Axial Casterbeam Rocket Fuel from CO2 ROT12 IT Micro Redstone IT Micro Radial Turbine IT Redstone IT10 Haas Tooling Helical 3D Heat Exchanger Coni Radial Inflow Mag Coupling ITXR Telsa Experimenters Kit 3D Filter Ejector Pump Solid State Chiller SDR Charts Vortex Tube Desalination Structured Data TriboJet Heat Pump ORC Standing Wave Turbine Illusion Drone CO2 Phase Change Cart CO2 ORC and Heat Pump Build License CO2 ORC and Heat Pump Experimenters Platform Solar Thermal Modular Heater Sulfur Deposition Using Supercritical CO2 Gas Leverage Turbine Sulfur Deposition Using Supercritical CO2 Viktor Schauberger CO2 Gas SuperCapacitor Turbine Condensed Matter Battery RIN Renewable Identification Number CO2 Flow Battery Modular Block Heat Pump Turbine Kit Turbine Machining Organogel Electrolyte CO2 Hydraulic Motor and Actuator Davos Hydro Electric Turbine Flow Battery Licensing ROT 12 Turbine Plans Sand Battery Features Sand Battery Product UK Solar Power Homeowner Paraffin Wax Thermal Energy Storage Modular Block Examples Salt Battery Utility Power Energy Mining Water Conditioning Power Production Cogen Battery Powerplant Brine as a Flow Battery Saltwater Foam Flow Battery Membrane Salt Battery Graphene Hard Carbon from Wood Wastes Salt Water Redox Flow Battery Tech Report Energy Strategy Technology Guide Robots Technology Guide Ferro Fluids Technology Guide Organic Rankine Cycle Builders Guide Desalination ORC Salgenx Lift Pump Tesla Disc Pump Turbine Tesla Disc Pump Turbine IT Mini Kit

IT50 System

Infinity Turbine IT50 System for AC Power from Waste Heat

The IT50 is designed to produce 50 kW of AC power (typically configured for a Grid-Tie connection). We have produced several IT50 systems in the past few years. They take about 6 months to complete, and can be shipped in a standard 20 ft. shipping container.

Design Heat Exchangers ASME Rated Pressure - Evaporator R-245fa: 450 psi at 300 F shell side, and 150 psi 300 F on tube side. Welding procedures included. Condenser R-245fa: 450 psi at 250 F shell side, and 150 psi 250F on tube side.

Turbine may be used most efficiently at 50 kW, but may also be used for a range of turbines from 30 kW to over 100 kW.

IT50 Revenue based on gross sales or savings, not including cost of acquiring waste heat flow or pumps.

Revenue from IT50 (24 hours x 365 days per year x 50 kWh = 438,000 kWh per year):

at $.20 per kWh = $87,600 USD per year

at $.50 per kWh = $219,000 USD per year

at $1.00 per kWh = $438,000 USD per year

Plans Option for IT50

IT50 Loaded into a 20 ft Shipping Container

Grid Tie Device

Our induction AC generators require a grid tie device, which can be found on the link below from Sieb Meyer in Germany.

Grid Tie Device

IT50 Completed System

IT50 System Purchase Details

IT50 Organic Rankine Cycle System with ROT turbine and 50 kW output generator.

Standard complete system, which will accept 80-110 deg C input thermal fluid.

Heat exchangers are ASME designed and build by Henry Technologies in Canada.

Unit ships without refrigerant. 50-60 hz 380-480 (approx) V AC Generator.

Designed for R245fa. You may use R134a, proper cooling will be required. Unit includes a AC induction (asynchronous) generator, which will require the use of a grid-tie device to operate.

Unit has basic PLC for monitoring operating temperatures and pressures, but unit is really controlled by the grid-tie device, which senses output power and will adjust the VFD feedpump, which ultimately controls the turbine rotor speed. See: http://www.sieb-meyer.de

Sieb Meyer

Completed IT50 System

IT50 Scope of Supply

Please see our Scope of Supply for the IT50. This will be updated with new purchase to reflect any new technology or components.

IT50 Scope of Supply

IT50 System Software

IT50 System Software Run Mode

IT50 Performance Curve