ROT12 Radial Outflow Turbine ORC for Waste Heat to Energy Applications

ROT12 Plans

ROT Radial Outflow Turbine has a 12 inch diameter (ROT12). The ROT12 can drive (depending on pressure) a 3-10 kW generator. We have tested the ROT12 on compressed air of only 80 psi and was able to get our resistance light board lighted (there are 10 x 200 watt lights per row and up to 10 rows of lights). The turbine design is unique in that it uses the generator shaft and bearings for support, and a simple pipe with Gruvlok or Victaulic couplings to seal in the pressure. The flat end plates (discs) are easily waterjet or machined out of aluminum or stainless steel. If you are using CO2 or water steam for the working fluid, we suggest more durable bearings that will tolerate the pressurized environment. You can also use a shaft seal to isolate the turbine section, and put the DC or AC generator outside, which does not require any special bearing lubrication that is tolerant to the inside turbine working fluid.

IT10 Revenue based on gross sales or grid savings, not including cost of acquiring waste heat flow or pumps.

Revenue from IT10 (24 hours x 365 days per year x 10 kWh = 87,600 kWh per year):

at $.20 per kWh = $17,520 USD per year

at $.40 per kWh = $35,040 USD per year

at $.80 per kWh = $70,080 USD per year

Plans Details

The plans include images of each component in (jpg/png) and .pdf views.

The machine ready files include dwg, dxf, xt and we can provide other files on request from our AutoDesk suite of Cad/Cam software.

The files are provided by a FTP download.

The license is for the turbine blueprints only, and does not include any support (optional).

If you would like system blueprints (bill of materials, heat exchangers, pump motor, frame, piping, etc.) for our Supercritical CO2 or standard R245fa, or R134a, please contact Infinity.

INFINITY TURBINE LLC We specialize in designs, plans, licensing, consulting, design services, and surplus spare parts. We no longer manufacture turbines or CO2 systems. More Info...

TEL: +1-608-238-6001 (Chicago Time Zone ) USA

Email: greg@infinityturbine.com

CO2 Ejectors for Data Center Waste Heat Cooling: A Technical Review Hyperscalers are racing to deploy gigawatts of AI compute, but the grid can't keep up and large gas turbines are backordered half a decade out. Infinity Turbine's Cluster Mesh Supercritical CO₂ system offers a radical alternative: modular, silent, trailer-deployable prime power that scales the way software does... More Info

Turning AI Data Center Waste Heat Into Electricity More Info

Cooling a Data Center Pod with Its Own Waste Heat: A 100 kW Ejector Design Study More Info

Portable Gas Turbine Prime Power AI data centers are pushing electrical infrastructure to its limits. The traditional AC power chain is no longer optimal for GPU-driven workloads. A DC-native architecture using Infinity Turbine’s Cluster Mesh system offers a path to higher efficiency, lower costs, and scalable modular power—potentially saving tens of millions per year at hyperscale... More Info

SMR and Cluster Mesh Supercritical CO2 Power System for Data Centers and AI Pairing Cluster Mesh Supercritical CO2 Power System with Small Modular Reactors enables hyperscalers to convert high-grade nuclear heat into ultra-efficient, dispatchable power with a compact, modular footprint tailored for AI-scale demand. More Info

ORC and Products Index Infinity Turbine ORC Index... More Info

AMD Helios Cooling Strategy Using Transcritical CO2 and a Cluster Mesh sCO2 Turbine Generator Cell More Info

CONTACT TEL: +1-608-238-6001 (Chicago Time Zone USA) Email: greg@infinityturbine.com (Standard Web Page) | PDF