TEL: 1-608-238-6001 Email: greg@infinityturbine.com
All ORC and ROT Turbine Plans are $10,000 Each Most plans include unlimited production license. The larger IT250 and ROT 24 have additional license fees. More Info
Price List for IT Systems and Turbines 2024 Price list in pdf format More Info
Infinity Turbine MW Class ROT Turbine with Three Stages over dual rotors |
Radial Outflow Turbine 1MW AC Generator Hermetically Sealed Infinity Turbine now has a megawatt-class ORC radial outflow concept turbine.Multiple turbine generators are stacked in standard hi-cube shipping containers for the 3 MW Power Pack.These run on heat from 90-160 C. Sources include industrial heat, solar thermal, engine heat, geothermal, and more.Revenue based on gross sales or savings, not including cost of acquiring waste heat flow or pumps.Revenue from 1 MW (24 hours x 365 days per year x 1000 kWh = 8,760,000 kWh per year):at $.20 per kWh = $1,752,000 USD per yearat $.40 per kWh = $3,504,000 USD per yearat $.80 per kWh = $7,008,000 USD per yearRevenue from 3 MW (24 hours x 365 days per year x 3000 kWh = 26,280,000 kWh per year):at $.20 per kWh = $5,256,000 USD per yearat $.40 per kWh = $10,512,000 USD per yearat $.80 per kWh = $21,024,000 USD per yearRevenue from 6 MW (24 hours x 365 days per year x 1000 kWh = 8,760,000 kWh per year):at $.20 per kWh = $10,500,000 USD per yearat $.40 per kWh = $21,000,000 USD per yearat $.80 per kWh = $42,000,000 USD per year |
Infinity Turbine 1 MW ROT Turbine with Dual Rotors |
Bearings Bearings are oil lubricated and use lip seals to keep the oil separated from refrigerant system.
|
Infinity Turbine MW-Class ROT Turbine Flow Diagram |
Infinity Turbine MW-Class ROT Turbine with Two Stages 74 inches x 46 inches |
Dimensions of Turbine Assembly and Rotors Overall turbine generator housing assembly dimensions are 74 inches (1880 mm) in length.Overall frontal area is 46 inches (1168 mm) by 37 inches (940 mm).Turbine Blade Height: 4.5 inches (114 mm)Turbine Rotor Diameter: 24 inches (609.6)Turbine Blades Manufacturing: CNC or may be 3D metal printed with slotted fastened rotor disc attachment. There are also waterjet stacking layer options to reduce machining time significantly.Spin: 3,600 RPMGenerator: 2 pole 2,400 V + Generator Diameter: 31 inches diameter (787 mm)Generator Type: Induction or SynchronousBearings: Oil lubricated lip seals to keep refrigerant separate from refrigerant (working fluid) in the system.
|
| CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com | RSS | AMP | PDF | IG | X.com |