Radial Inflow Turbine 12 Inch Diameter Laser Cut for ORC Applications by Infinity Turbine

TEL: 1-608-238-6001 Email: greg@infinityturbine.com

3000 kWh Grid Scale Saltwater Battery System Container Mounted (no lithium) Salgenx Saltwater Battery: license to build and sell to the high growth large battery market... More Info

12 Inch Radial Inflow Turbine

Radial Inflow 12 Inch Turbine The IT 10 Redstone Turbine is an experimental turbine designed for small scale power production for the home or low power applications (IT10 1-10 kW). Project Goals: Make turbine fabrication simple by cutting 2D parts via waterjet or laser, then bolt to plates to form a complete assembly. Working Fluid: R-245fa, R-134, Compressed Air, pressurized water, and a Stainless Steel version with CO2. Rapid-Configuration: This assembly allows you to quickly configure turbines and test various working fluids and heat sources. The basic design is for 300 psi or less. Magnetic Coupling or Large Diameter Gruvlok Pipe Housing Assembly: The unique design has a basic 12 inch diameter which allows for direct-to-motor generator mounting or magnetic coupling and follower, which allows you to have a generator or drive unit mounted exterior. Plans and licensing available. IT10 Revenue based on gross sales or grid savings, not including cost of acquiring waste heat flow or pumps. Revenue from IT10 (24 hours x 365 days per year x 10 kWh = 87,600 kWh per year): at $.20 per kWh = $17,520 USD per year at $.40 per kWh = $35,040 USD per year at $.80 per kWh = $70,080 USD per year

12 Inch Radial Inflow Turbine Outer Stator

Radial Inflow 12 Inch Turbine Outer Stator Outer stator. 12 Inch Radial Inflow Turbine Outer Stator (pdf)

12 Inch Radial Inflow Turbine Back Plate

Radial Inflow 12 Inch Turbine Outer Stator Back Plate. 12 Inch Radial Inflow Turbine Back Plate (pdf)