INFINITY TURBINE LLC We specialize in designs, plans, licensing, consulting, design services, and surplus spare parts. We no longer manufacture turbines or CO2 systems. More Info...
Please email for first contact with request for more information
Email: greg@infinityturbine.com
Infinity Turbine CO2 Turbine Development and Testing Cart Supercritical CO2 Turbine Development Cart using high pressure filter canisters for rapid prototyping and commercialization for 1-25 kWh Power Generation... More Info
ORC and sCO2 Performance Charts: R134a, R245fa, CO2 – 2026 Edition Updated 2026 edition of Infinity Turbine’s ORC and supercritical CO2 performance curves: R134a, R245fa and CO2 charts, CO2 heat-rate tables from 100 to 700 °C, sCO2 turbine types, and data-center applications. 62-page PDF... More Info
Supercritical CO2 Turbine Generator Plans (Transcritical) Rankine Cycle Lab format for development ... More Info
Matra Concentrated Solar Project Using Infinity Turbine Generator for Power Production Solar thermal power production using a reflective dish concentrator... More Info
Cluster Mesh Supercritical CO2 Power System for Data Centers and AI Pairing Cluster Mesh Supercritical CO2 Power System with Small Modular Reactors enables hyperscalers to convert high-grade nuclear heat into ultra-efficient, dispatchable power with a compact, modular footprint tailored for AI-scale demand. More Info
ORC and Products Index Infinity Turbine ORC Index... More Info
A Generator Without Magnets Switched Reluctance is the simplest rotating electrical machine there is: a rotor of stacked steel laminations with salient teeth, and a stator carrying concentrated coils. The rotor has no magnets, no windings, no bars and no slip rings... More Info
IT50 System |
Infinity Turbine IT50 System for AC Power from Waste Heat The IT50 is designed to produce 50 kW of AC power (typically configured for a Grid-Tie connection). We have produced several IT50 systems in the past few years. They take about 6 months to complete, and can be shipped in a standard 20 ft. shipping container.Design Heat Exchangers ASME Rated Pressure - Evaporator R-245fa: 450 psi at 300 F shell side, and 150 psi 300 F on tube side. Welding procedures included. Condenser R-245fa: 450 psi at 250 F shell side, and 150 psi 250F on tube side. Turbine may be used most efficiently at 50 kW, but may also be used for a range of turbines from 30 kW to over 100 kW.IT50 Revenue based on gross sales or savings, not including cost of acquiring waste heat flow or pumps.Revenue from IT50 (24 hours x 365 days per year x 50 kWh = 438,000 kWh per year):at $.20 per kWh = $87,600 USD per yearat $.50 per kWh = $219,000 USD per yearat $1.00 per kWh = $438,000 USD per yearContact Infinity for pricing. |
IT50 Loaded into a 20 ft Shipping Container |
Grid Tie Device Our induction AC generators require a grid tie device, which can be found on the link below from Sieb Meyer in Germany.
|
IT50 Completed System |
IT50 System Purchase Details IT50 Organic Rankine Cycle System with ROT turbine and 50 kW output generator. Standard complete system, which will accept 80-110 deg C input thermal fluid. Heat exchangers are ASME designed and build by Henry Technologies in Canada. Unit ships without refrigerant. 50-60 hz 380-480 (approx) V AC Generator. Designed for R245fa. You may use R134a, proper cooling will be required. Unit includes a AC induction (asynchronous) generator, which will require the use of a grid-tie device to operate. Unit has basic PLC for monitoring operating temperatures and pressures, but unit is really controlled by the grid-tie device, which senses output power and will adjust the VFD feedpump, which ultimately controls the turbine rotor speed. |
Completed IT50 System |
IT50 Scope of Supply Please request our Scope of Supply for the IT50. This will be updated with new purchase to reflect any new technology or components.
|
IT50 System Software |
IT50 System Software Run Mode |
IT50 Performance Curve |
| CONTACT Email: greg@infinityturbine.com | AMP | PDF |