INFINITY TURBINE LLC We specialize in designs, plans, licensing, consulting, design services, and surplus spare parts. We no longer manufacture turbines or CO2 systems. More Info...
TEL: +1-608-238-6001 (Chicago Time Zone ) USA
Email: greg@infinityturbine.com
CO2 Ejectors for Data Center Waste Heat Cooling: A Technical Review Hyperscalers are racing to deploy gigawatts of AI compute, but the grid can't keep up and large gas turbines are backordered half a decade out. Infinity Turbine's Cluster Mesh Supercritical CO₂ system offers a radical alternative: modular, silent, trailer-deployable prime power that scales the way software does... More Info
From the Feher Cycle to the Cluster Mesh: A History of Supercritical CO₂ Power... More Info
Cooling a Data Center Pod with Its Own Waste Heat: A 100 kW Ejector Design Study More Info
Portable Gas Turbine Prime Power More Info
Cluster Mesh Supercritical CO2 Power System for Data Centers and AI Pairing Cluster Mesh Supercritical CO2 Power System with Small Modular Reactors enables hyperscalers to convert high-grade nuclear heat into ultra-efficient, dispatchable power with a compact, modular footprint tailored for AI-scale demand. More Info
ORC and Products Index Infinity Turbine ORC Index... More Info
AMD Helios Cooling Strategy Using Transcritical CO2 and a Cluster Mesh sCO2 Turbine Generator Cell More Info
6 inch diameter IT XR Turbine |
IT XR Turbine The IT XR 6 inch diameter turbine is an experimental turbine designed for small scale power production for the home or low power applications (IT10 1-10 kW).Project Goals: Make turbine fabrication simple by 3D printing a one part turbine with perimeter bearings and back mounted magnetic coupling for generator coil or exterior shaft drive or motor generator.Common Shaft Drive: The magnetic coupler is bored into the rotor assembly, which allows coil power generation, or a magnetic follower disc for touchless shaft drive, or exterior motor generator options.Working Fluid: R-245fa, R-134, Compressed Air, pressurized water, and a Stainless Steel version with CO2.Rapid-Configuration: This assembly allows you to quickly configure turbines and test various working fluids and heat sources. The basic design is for 300 psi or less.Magnetic Coupling or Large Diameter Gruvlok Pipe Housing Assembly: The unique design has a basic 6 inch diameter which allows for direct-to-motor generator mounting or magnetic coupling and follower, which allows you to have a generator or drive unit mounted exterior.Plans and licensing available.IT10 Revenue based on gross sales or grid savings, not including cost of acquiring waste heat flow or pumps.Revenue from IT10 (24 hours x 365 days per year x 10 kWh = 87,600 kWh per year):at $.20 per kWh = $17,520 USD per yearat $.40 per kWh = $35,040 USD per yearat $.80 per kWh = $70,080 USD per year |
IT XR Turbine |
IT XR Turbine Project Goals: Make turbine fabrication simple by 3D printing a one part turbine (rotor) with perimeter bearings and back mounted magnetic coupling for generator coil or exterior shaft drive or motor generator. |
IT XR Turbine |
IT XR Turbine Modular block assembly makes rapid prototyping and fabrication a reality. |
IT XR Turbine |
IT XR Turbine Modular block 3/8 inch bores and fasteners make assembly for all blocks and housings modular and standardized. |
IT XR Turbine |
IT XR Turbine We've fabricated hundreds of magnetic couplers, and have found them to be very useful for sealing in ORC turbines, while providing cooling and exterior shaft drive or generator options. The strength of the magnetic field (magnet strength, distance from coupler, and thickness of separation block wall) must be considered when using high torque applications. |
| CONTACT TEL: +1-608-238-6001 (Chicago Time Zone USA) Email: greg@infinityturbine.com | AMP | PDF |