1MW ROT Radial Outflow Turbine ROT ORC

TEL: 1-608-238-6001 Email: greg@infinityturbine.com

Salgenx Grid-Scale Battery 3000 kWh MegaWatt Pack | License and Build $600,000 for 3000 kWh battery using salt in a flow battery system... More Info

License and Build the Salgenx MegaWatt Pack and Realize $300,000 income and $105,000 Per Battery With a license, you will have access $1.2 Billion in pre orders. Consider that Tesla MegaPack has a one year waitlist and around 10,400 orders in queue (the market is huge)... More Info

The Company That Controls Battery Technology Controls the World A Look at the New Contenders from Tesla to Salgenx Saltwater MegaWatt Pack... More Info

Data Center Energy Strategies Using Cluster Mesh Power Generation Learn more about cooling and power strategies for Data Centers for the Cloud and AI... More Info

ORC Radial Outflow Turbine Flat Pack Kit Infinity Turbine is now offering a ROT Radial Outflow Turbine for customer assembly flat pack kit.... More Info

Sodium Flow Grid-Scale Battery Technology Report With insights derived from extensive research and engineering expertise, the report offers valuable recommendations for optimizing financial viability, includes how to build demo... More Info

Pulse Cooling for Data Center GPUs Efficiently cool data center GPUs using supercritical CO2 technology for unmatched energy savings and performance... More Info

NVIDIA Blackwell Heating Issues Discover how Infinity Turbine's Pulsed Heat Pump Cooling Technology tackles the overheating challenges of Nvidia's Blackwell chips... More Info

Infinity Turbine 1 MW ROT Turbine with Three Stages over dual rotors

Radial Outflow Turbine 1MW AC Generator Hermetically Sealed Infinity Turbine now has a megawatt-class ORC radial outflow concept turbine. Multiple turbine generators are stacked in standard hi-cube shipping containers for the 3 MW Power Pack. These run on heat from 90-160 C. Sources include industrial heat, solar thermal, engine heat, geothermal, and more. Revenue based on gross sales or savings, not including cost of acquiring waste heat flow or pumps. Revenue from 1 MW (24 hours x 365 days per year x 1000 kWh = 8,760,000 kWh per year): at $.20 per kWh = $1,752,000 USD per year at $.40 per kWh = $3,504,000 USD per year at $.80 per kWh = $7,008,000 USD per year Revenue from 3 MW (24 hours x 365 days per year x 3000 kWh = 26,280,000 kWh per year): at $.20 per kWh = $5,256,000 USD per year at $.40 per kWh = $10,512,000 USD per year at $.80 per kWh = $21,024,000 USD per year Revenue from 6 MW (24 hours x 365 days per year x 1000 kWh = 8,760,000 kWh per year): at $.20 per kWh = $10,500,000 USD per year at $.40 per kWh = $21,000,000 USD per year at $.80 per kWh = $42,000,000 USD per year Email: 1 MW ROT Info

Infinity Turbine 1 MW ROT Turbine Dual 24 inch diameter rotors with 12 inch stack height with three stages

Radial Outflow Turbine 1MW AC Generator Hermetically Sealed Using a scaled up version of existing ROT technology, this design may produce 1 megawatt of power. Turbine would operate at full load speed of 3600 rpm. Turbine is direct mounted to an induction generator (2-pole). Due to the large size of the generator, it is likely a higher voltage than typical (2400V+) and would probably need to be direct grid connect because grid tie controllers cannot be found in this size or voltage. Size of generator likely to be 31in OD and needs a custom cast iron housing for direct refrigerant cooling. Construction of plates and turbine are possible using current manufacturing capabilities. Large cast iron housings are likely to be outsourced to a vendor (several available). Generator may be an induction motor from a chiller motor supplier (operating in reverse) if no generator suppliers can be found.

Infinity Turbine 1 MW ROT Turbine with Dual Rotors

Bearings Bearings are oil lubricated and use lip seals to keep the oil separated from refrigerant system.

Infinity Turbine 1 MW ROT Turbine Flow Diagram

Working Pressure 200 PSIG Design Working Pressure is to be 200 psig and refrigerant is to be R245fa.

1 MW ROT Turbine with Dual Rotors that have Three Stages each

Heat Exchanger Design Requirements Heat exchanger design should be 212F (evap water in), 95F (condenser water in), 20 F ranges and 20 F approaches. This requires 125 lbm/s refrigerant flow and provides 10 percent system efficiency (Evap heat = 30,000,000 Btu/hr). Oversize the condenser for better cooling. To save on manufacturing, make both evaporator and condenser same size to take advantage of economies of scale. Turbine is dual sided ROT with 3 stages (4.5 inch blade heights per side). Overall Diameter is 24in. Designed to produce 1MW output

Infinity Turbine 1 MW ROT Turbine with Two Stages 74 inches x 46 inches

Dimensions of Turbine Assembly and Rotors Overall turbine generator housing assembly dimensions are 74 inches (1880 mm) in length. Overall frontal area is 46 inches (1168 mm) by 37 inches (940 mm). Turbine Blade Height: 4.5 inches (114 mm) Turbine Rotor Diameter: 24 inches (609.6) Turbine Blades Manufacturing: CNC or may be 3D metal printed with slotted fastened rotor disc attachment. There are also waterjet stacking layer options to reduce machining time significantly. Spin: 3,600 RPM Generator: 2 pole 2,400 V + Generator Diameter: 31 inches diameter (787 mm) Generator Type: Induction or Synchronous Bearings: Oil lubricated lip seals to keep refrigerant separate from refrigerant (working fluid) in the system.

Infinity Turbine 1 MW ROT Turbine Dimensions 37 x 46 inches