IT Mini Turbine ORC Expander Experimenters Kit
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit
The IT Mini Experimenters Kit is designed for modular block rapid prototyping of turbine (expander) blades. We have all the parts for this kit for purchase, or you may purchase the plans and build yourself. We have these in aluminum and HDPE, but you can use any material determinant on the working pressure needed. We have successfully used these using R-245fa, R-134, Compressed Air, pressurized water, and a Stainless Steel version with CO2. See our YouTube videos for examples.Modular Block Assembly: Used since 2008, our Modular Block concept has been used in hundreds of turbine prototypes and production assemblies. These 2.5 inch hexagonal blocks (3 inch overall width) have a interior bore for expanders which measures 2 inches. 10/32 standardized threaded bores and passthrough bores for 10/32 bolts.Purpose: The purpose of the kit is to allow rapid prototyping and experimentation of your turbine or expander design in a bolt-together format.Rapid-Configuration: This strategy allows you to quickly assemble turbines and test various expanders on air and water. The basic design is for 300 psi or less, which is determinant on the back magnetic coupling block which is made from HDPE. If you can make from nonmagnetic metal or composite fiber for a thicker (stronger) back, then you can use fluids with greater pressure.Magnetic Coupling: The design has a basic 2 inch diameter magnetic coupling and follower, which allows you to have a generator or drive unit mounted exterior.Plans and licensing available.
IT Mini Experimenters Kit Assembly (pdf):
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit Assembly
The block assembly design and strategy allow you to easily incorporate any changes to the design for your application, whether it be a turbine, a compressor, a expander, a pump, or any combination of the above.Plans and licensing available.
IT Mini Experimenters Kit Back Block (pdf)
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit Magnetic Coupling
Magnetic Coupling: The design has a basic 2 inch diameter magnetic coupling and follower, which allows you to have a generator or drive unit mounted exterior.
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit Modular Block Format
The modular block format allows quick connect using 10/32 fasteners.
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit
The IT Mini Experimenters Kit is designed for modular block rapid prototyping of turbine (expander) blades. We have all the parts for this kit for purchase, or you may purchase the plans and build yourself. We have these in aluminum and HDPE, but you can use any material determinant on the working pressure needed. We have successfully used these using R-245fa, R-134, Compressed Air, pressurized water, and a Stainless Steel version with CO2. See our YouTube videos for examples.
IT Mini Experimenters Turbine Kit
IT Mini Experimenters Kit Turbine Blade
Rapid-Configuration: This strategy allows you to quickly assemble turbines and test various expanders on air and water. The basic design is for 300 psi or less, which is determinant on the back magnetic coupling block which is made from HDPE. If you can make from nonmagnetic metal or composite fiber for a thicker (stronger) back, then you can use fluids with greater pressure.Magnetic Coupling: The design has a basic 2 inch diameter magnetic coupling and follower, which allows you to have a generator or drive unit mounted exterior.
IT Mini Experimenters Kit Shaft (pdf)
Modular Block Configuration for Tesla Pump or Tesla Turbine
Modular Block Tesla Disc Experimenters Kit
Infinity has long been promoting building small prototypes and then numbering up to scale up, thereby eliminating most larger to-scale issues. The modular block experimenters kit allows entrepeneurs a gateway to verify development and then provide a methodology to evolve concepts to commercialized products.The experimenters kit provides multiple Tesla pump and turbine discs (stamped out of steel) which can be stacked on a common shaft for experiments.
TEL: 1-608-238-6001 Email: greg@infinityturbine.com
Salgenx Grid-Scale Battery 3000 kWh MegaWatt Pack | License and Build 3000 kWh battery using salt in a flow battery system available for $600,000 ... More Info
The Company That Controls Battery Technology Controls the World A Look at the New Contenders from Tesla to Salgenx Saltwater MegaWatt Pack...
Data Center Energy Strategies Using Cluster Mesh Power Generation Learn more about cooling and power strategies for Data Centers for the Cloud and AI... More Info
CONTACT TEL: 608-238-6001 Email: greg@infinityturbine.com
(Standard Web Page) | PDF | IG | X.com